(4)
Connect the USB storage device to the USB connector (host) on the SYS board.
Notes:
•
Do not connect multiple USB storage devices together.
•
The USB storage device can be connected to either of 2 USB connectors (host).
•
In case the printer kit (GM-1060), printer/scanner kit (GM-2060) and scanner upgrade kit
(GM- 4060) are used, the update must be performed after all the "dongles" are disconnected
from the USB connector (host) and only the USB storage device is connected.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
USB storage device
Fig. 6-71
6 - 95
05/11
USB connector
( host )
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6