Toshiba e-STUDIO350 Service Handbook page 196

Classifi-
Code
cation
672 General Initialization of department
management information
673 General Trial period setting
678 General Setting of banner advertis-
ing display
679 General Banner advertising display
1
680 General Banner advertising display
2
681 General Display of [BANNER MES-
SAGE] button
682 Use Offsetting between jobs
interface
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08) <e-STUDIO352/353/452/453>
Func-
Items
tion
-
ALL
ALL
ALL
ALL
ALL
ALL
2 - 176
07/11
Default
<Accept-
RAM
able
value>
- SYS Initializing of the depart-
ment management
information
* Key in the code and
press the [INITIAL-
IZE] button to per-
form the
initialization.
If the area storing
the department
management infor-
mation is destroyed
for some reason,
"Enter Department
Code" is displayed
on the control panel
even if the depart-
ment management
function is not set
on. In this case, ini-
tialize the area with
this code. This area
is normally initial-
ized at the factory.
254 SYS Sets the trial period
<1-60> from 1 to 60 days. This
setting is effective only
when the default value
is "254". Once the
default value is set, this
value is only used for a
reference.
0 SYS Sets whether or not dis-
<0-1> playing the banner
advertising. The setting
contents of 08-679 and
08-680 are displayed at
the time display section
on the right top of the
screen. When both are
set, each content is dis-
played alternately.
0: Not displayed
1: Displayed
- SYS Maximum 27 letters
(one-byte character)
- SYS Maximum 27 letters
(one-byte character)
0 SYS 0: Not displayed
<0-1> 1: Displayed
* This button enables
the entry of "Banner
advertising display 1
(08-679)" and "Ban-
ner advertising dis-
play 2 (08-680)" on
the control panel.
1 SYS 0: Invalid
<0-1> 1: Valid
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
3
1
1
11
11
1
1