Toshiba e-STUDIO350 Service Handbook page 128

Classifi-
Code
cation
613 User Paper size selection for
interface [OTHER] button
614 Network Local I/F time-out period
615 General Size information of main
memory and page memory
617 User Print setting without
interface department code
618 User Default setting when mixed
interface size originals are set on
RADF
619 Paper Time lag before Auto Job
feeding Start of bypass feeding
620 User Department management
interface setting (Copier)
621 User Department management
interface setting (FAX)
622 User Department management
interface setting (Printer)
623 User Department management
interface setting (Scanner)
624 User Department management
interface setting (List print)
625 User Blank copying prevention
interface mode during RADF jam-
ming
627 User Rotation printing at the
interface nonsorting
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08) <e-STUDIO350/450>
Func-
Items
tion
PPC
PRT
ALL
ALL
PPC
ALL
PPC
FAX
PRT
SCN
PRT
PPC
ALL
2 - 108
Default
<Accept-
RAM
able
value>
EUR: SYS Press the icon on the
FOLIO LCD to select the size.
UC:
COMP
JPN:
A5-R
6 SYS Sets the period of time
<1-50> when the job is judged
as completed in local I/
F printing (USB or par-
allel).
1: 1.0 sec.
2: 1.5 sec.
-50: 25.5 sec.
(in increments of 0.5
sec.)
- SYS Displays the sizes of
the main memory and
page memory. Enables
to check if each mem-
ory is properly recog-
nized.
1 SYS 0: Printed forcibly
<0-2> 1: Not printed
2: Deleted forcibly
0 SYS 0: Scanned as all in
<0-1> same size
1: Scanned as each
original size
4 SYS Sets the time taken to
<0-10> add paper feeding
when paper in the
bypass tray has run out
during the bypass feed
copying.
0: Paper is not drawn
in unless the
[START] button is
pressed.
1-10: Setting value x
1 SYS 0: Invalid
<0-1> 1: Valid
1 SYS 0: Invalid
<0-1> 1: Valid
1 SYS 0: Invalid
<0-1> 1: Valid
1 SYS 0: Invalid
<0-1> 1: Valid
1 SYS 0: Invalid
<0-1> 1: Valid
0 SYS 0: OFF
<0-1> 1: ON (Start printing
when the scanning
of each page is fin-
ished)
0 SYS 0: Not rotating
<0-1> 1: Rotating
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
9
1
2
1
1
1
0.5sec.
1
1
1
1
1
1
1