Toshiba e-STUDIO350 Service Handbook page 562

18) Image dislocation in feeding direction
Defective area Step
Scanner/Printer 1
adjustment
Registration roller 2
3
Feed clutch 4
Pre-registration 5
guide
e-STUDIO350/352/353/450/452/453
TROUBLESHOOTING
Check items
Have the printed images been dislo-
cated in the same manner?
Is the registration roller dirty, or the
spring detached?
Is the registration roller working
properly?
Is the feed clutch working properly?
Is the pre-registration guide installed
properly?
5 - 126
Prescription
Adjust the position of the leading edge of
paper in the Adjustment Mode.
Clean the roller with alcohol. Securely
attach the springs.
Adjust or replace the gears if they are not
engaged properly.
Check the circuit or clutch, and replace
them if necessary.
Install the guide properly.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved