Toshiba e-STUDIO350 Service Handbook page 339

(8) Attach the developer sleeve cover and
tighten 2 screws.
Notes:
1. Tighten the screws from the one on the
front side.
2. Make sure that the developer sleeve
cover is correctly attached otherwise it will
be deformed.
3. Make sure that the toner scattering pre-
vention sheet is not caught up in the
developer sleeve cover.
(9) Attach the developer material cover.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Screw
Fig. 3-53
Fig. 3-54
3 - 51
Developer
sleeve cover
Screw
Developer
material cover
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3