Toshiba e-STUDIO350 Service Handbook page 170

Classifi-
Code
cation
248 Paper Memory 3
feeding Paper size (bypass feed-
ing/non-standard type)
feeding/width wise direc-
tion
249 Paper Memory 4
feeding Paper size (bypass feed-
ing/non-standard type)
feeding/width wise direc-
tion
250 Mainte- Service technician tele-
nance phone number
251 Mainte- Setting value of PM
nance counter
252 Mainte- Current value of PM
nance counter Display/0 clearing
253 Mainte- Error history display
nance
254 Paper LT↔A4/LD↔A3
feeding
255 Paper PFP/LCF installation
feeding
256 Paper Paper size setting /LCF
feeding
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08) <e-STUDIO352/353/452/453>
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
PRT
ALL
ALL
2 - 150
07/11
Default
<Accept-
RAM
able
value>
148/100 SYS Registers the paper
<148- size of bypass feed
432/100- (non-standard type) into
297> [MEMORY 3].
148/100 SYS Registers the paper
<148- size of bypass feed
432/100- (non-standard type) into
297> [MEMORY 4].
0 SYS A telephone number
<32 dig- can be entered up to 32
its> digits.
Use the [MONITOR/
PAUSE] button to enter
a hyphen(-).
Refer to M <Default>
content e-STUDIO352/353
<8 digits> UC, EUR: 120000
JPN: 0
e-STUDIO452/453
UC, EUR: 150000
JPN: 0
0 M Counts up when the
<8 digits> registration sensor is
ON.
- SYS Displays the latest 20
errors data
0 SYS Sets whether the data is
<0-1> printed on the different
but similar size paper or
not when the paper of
corresponding size is
not available.
0: Valid (The data is
printed on A4/A3
when LT/LD is
selected or vice
versa.)
1: Invalid (The mes-
sage to use the
selected paper size
is displayed.)
0 M 0: Automatic
<0-4> 1: PFP single-drawer
type installed
2: PFP dual-drawer
type installed
3: LCF installed
4: Not installed
EUR: A4 M Press the icon on the
UC: LT LCD to select the size.
JPN: A4
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
10
10
11
1
1
2
1
1
9