Precautions For Storing And Handling Supplies; Precautions For Storing Toshiba Supplies - Toshiba e-STUDIO350 Service Handbook

4.9

Precautions for Storing and Handling Supplies

4.9.1

Precautions for storing TOSHIBA supplies

1) Toner/Developer
Toner and developer should be stored in a place where the ambient temperature is between 10°C to
35°C (no condensation), and should also be protected against direct sunlight during transportation.
2) Photoconductive drum
Like the toner and developer, photoconductive drum should be stored in a dark place where the
ambient temperature is between 10°C to 35°C (no condensation). Be sure to avoid places where
drums may be subjected to high humidity, chemicals and/or their fumes.
3) Drum cleaning blade
This item should be stored in a flat place where the ambient temperature is between 10°C to 35°C,
and should also be protected against high humidity, chemicals and/or their fumes.
4) Fuser roller
Avoid places where the rollers may be subjected to high humidity, chemicals and/or their fumes.
5) Cleaning roller
Avoid places where the rollers may be subjected to high humidity, chemicals and/or their fumes.
They should also be stored "horizontally" on a flat surface.
6) Paper
Avoid storing paper in places where it may be subjected to high humidity.
After a package is opened, be sure to place and store it in a storage bag.
e-STUDIO350/352/353/450/452/453
PREVENTIVE MAINTENANCE (PM)
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
4 - 32