Toshiba e-STUDIO350 Service Handbook page 150

Classifi-
Code
cation
1145 Mainte- Counter notification
nance Remote FAX setting
(Remote)
1372 Image Heater and energizing time
process- accumulating counter Dis-
ing play/0 clearing
1376 Image Toner cartridge drive
process- counter Number of output
ing pages
1385 Image Number of output pages
process- (Thick paper 1)
ing
1386 Image Number of output pages
process- (Thick paper 2)
ing
1387 Image Number of output pages
process- (Thick paper 3)
ing
1388 Image Number of output pages
process- (OHP film)
ing
1390 Paper Feeding retry counter
feeding (upper drawer)
1391 Paper Feeding retry counter
feeding (lower drawer)
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08) <e-STUDIO350/450>
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 130
05/05
Default
<Accept-
RAM
able
value>
- SYS Maximum 32 digits
Enter a hyphen with the
[MONITOR/PAUSE]
button.
0 M Counts up the heater
<8 digits> control time accumu-
lated (when power of
the equipment is ON)
but does not count at
the Sleep Mode. When
the counter value of the
fuser roller is cleared,
this counter value is
also cleared in sync at
the PM support mode.
0 M Counts the rotation
<8 digits> number of the toner
cartridge.
0 M Counts up when the
<8 digits> registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at the PM support
mode.
0 M Counts up when the
<8 digits> registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
0 M Counts up when the
<8 digits> registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
0 M Counts up when the
<8 digits> registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
0 M Counts the number of
<8 digits> times of the feeding
retry from the upper
drawer.
0 M Counts the number of
<8 digits> times of the feeding
retry from the lower
drawer.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
11
1
1
1
1
1
1
1
1