Toshiba e-STUDIO350 Service Handbook page 566

22) Blotched image
Defective area Step
Paper 1
2
Separation 3
Transfer 4
5
High-voltage trans- 6
former
(Transfer charger)
e-STUDIO350/352/353/450/452/453
TROUBLESHOOTING
Check items
Is the paper type corresponding to
its mode?
Is the paper too dry?
Is the output from the separation
charger too high?
Is the transfer charger case dirty?
Is the transfer charger wire dirty?
Is the output from the high-voltage
transformer normal?
5 - 130
06/09
Prescription
Check the paper type and mode.
Change the paper.
Adjust the output.
Clean the case.
Clean the wire.
Adjust the output. Replace the transformer
if necessary.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved