Setting Range Correction - Toshiba e-STUDIO350 Service Handbook

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO350:
Table of Contents

Advertisement

3.3.4

Setting range correction

The values of the background peak / text peak in the range correction can be switched to "varied" or
"fixed" in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affect the reproduction of the background density and the values of
the text peak affect that of the text density.
Original mode
Text/Photo
Photo
570
571
(913)
(915)
693
694
(916)
(918)
* The values in "( )" are the adjustment codes of the Custom Mode.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of
3.3.5
Setting range correction (Adjustment of background peak)
The levels of the background peak for the range correction can be set at the following codes.
Original mode
Text/Photo
Photo
532
533
(919)
(921)
* The values in "( )" are the adjustment codes of the Custom Mode.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Item to be adjusted
Text
572
Range correction for original
(914)
manually set on the original
glass
695
Range correction for original
(917)
set on the RADF
P. 3-21 "3.3.1 Density adjustment".
Item to be adjusted
Text
534
Background peak for range
(920)
correction
P. 3-21 "3.3.1 Density adjustment".
3 - 23
< Adjustment Mode (05) >
Remarks
The following are the default values
set for each original mode.
Text/Photo: 12, Photo: 12, Text: 22
Each digit stands for:
One's place: Automatic density mode
Ten's place: Manual density mode
The setting conditions possible are
as follows:
Background peak
Text peak
1:
fixed
2:
varied
3:
fixed
4:
varied
< Adjustment Mode (05) >
Remarks
When the value increases, the back-
ground (low density area) of the
image is not output.
Acceptable values: 0 to 255
(Default: Text/Photo: 40, Photo: 16,
Text: 64)
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3
fixed
fixed
varied
varied

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents