Toshiba e-STUDIO350 Service Handbook page 292

[Procedure to key in adjustment values]
In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification. By pressing the [FAX] button,
immediately after starting the Adjustment Mode (05S), single-sided test copying can be performed (nor-
mal copy mode).
<Operation keys>
0 5
POWER
1
Digital keys : Enter codes.
START
Digital keys : Enter adjustment
values.
( CLEAR Use to make corrections)
ENTER Value ZZZ is stored
replacing values YYY.
or
INTERRUPT
FAX : Test copy
If the test copy does not
satisfy the specified values,
return to step 1 and
repeat the adjustment
procedure.
Power OFF/ON : Exit the Adjustment Mode.
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
<Display>
A
100%
TEST MODE
XXX
100%
TEST MODE
YYY ZZZ
Current adjustment
value
A
100%
TEST MODE
A
100%
Wait Warming Up
A
100%
COPYING
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 4
04/05
Varies with the code "XXX" keyed in
A3
Code No.
A3
Adjustment value newly entered
(If no entering, YYY is displayed.)
A3
A3
A3