Toshiba e-STUDIO350 Service Handbook page 318

[ 1-1 ] Installation of the current measuring jig
Notes:
• Clean the toner recovery auger when the toner is sticking to it. Then attach the jig.
• Do not damage the tip of the separation fingers.
(1) Open the front cover.
(2) Remove the toner bag.
(3) Pull up the hinge pin and extract it.
(4) Take off the front cover.
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
Toner bag
Hinge pin
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 30
Front cover
Fig. 3-13
Fig. 3-14
Front cover
Fig. 3-15