Toshiba e-STUDIO350 Service Handbook page 635

Note: Note:
Record the current settings of the DIP switch before changing them. After the updating is com-
pleted, return the DIP switch to the status as record.
<Updating Finisher Firmware>
Change all the setting of the DIP switch (1-8) to OFF.
<Updating Saddle Stitcher Firmware>
Change the setting of the DIP switch 1-6 to OFF and 7-8 to ON.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-57
6 - 59
05/11
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6