Toshiba e-STUDIO350 Service Handbook page 322

(16) Install the main charger unit.
(17) Install the cleaner unit and fix it with 2
screws.
(18) Install the toner bag full detection sensor-2.
(19) Fix the green cable of the current measuring
jig to the frame of the equipment, and con-
nect the jig detection connector to the con-
nector of the developer unit in the
equipment.
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
Screw
Green cable
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 34
07/07
Main charger unit
Fig. 3-25
Cleaner unit
Screw
Toner bag full
detection sensor-2
Fig. 3-26
Connector of
developer unit
Jig detection
connector
Fig. 3-27