Image Control Related Service Call - Toshiba e-STUDIO350 Service Handbook

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO350:

Table of Contents

[A221] Print job cancellation

This message appears when deleting the job on the screen.

[A222] Print job power failure

When there are running jobs, perform the job in error again after the completion of the running jobs.

If the error still occurs, turn the power OFF and then back ON, and perform the job again.

[A290] Limit over error

[A291] Limit over error

[A292] Limit over error

Clear the limit counter.

Image control related service call

[CE50] Temperature/humidity sensor abnormality

Is the connector CN317 on the LGC board or the connector of the temperature/humidity sen-

sor disconnected?

Is the harness between the LGC board and the temperature/humidity sensor disconnected?

Connect the connector securely. Replace the harness.

1) Replace the temperature/humidity sensor.

2) Replace the LGC board.

e-STUDIO350/352/353/450/452/453

TROUBLESHOOTING

Show Quick Links

Table of Contents