Setting Mode (08) (E-Studio352/353/452/453) - Toshiba e-STUDIO350 Service Handbook

2.2.8

Setting mode (08) (e-STUDIO352/353/452/453)

The items in the setting code list can be set or changed in this setting mode (08).
Procedure 1
[0][8] [Digital key]
[POWER] (Code)
* Press [FUNCTION CLEAR] to enter minus (-).
Procedure 2
[0][8] [Digital key]
[POWER] (Code)
Procedure 3
[0][8]
[Digital key]
[POWER] (Code)
[CANCEL] or [CLEAR]
Procedure 4
[0][8] [Digital key]
[START]
[POWER] (Code)
* Press [FUNCTION CLEAR] to enter minus (-).
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
[CANCEL]
[Digital key]
[START]
*[FUNCTION CLEAR]
Sets or
changes value
(Corrects value)
[ENTER]
[START]
[INTERRUPT]
Adjustment value
cannot be changed
[ENTER]
[START] or
[INTERRUPT]
(Stores value in RAM)
[CANCEL]
[START]
[Digital key]
[START]
(Sub-code)
[CLEAR]
(Corrects value)
2 - 144
07/11
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
[POWER]OFF/ON
or
(Exit)
(Automatic setting)
[ENTER]
[Digital key]
[INTERRUPT]
* [FUNCTION CLEAR]
(Stores value
Sets or
changes value in RAM)
[CLEAR]
(Corrects value)
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[POWER] OFF/ON
(Exit)
[POWER] OFF/ON
(Exit)
[POWER]
or OFF/ON
(Exit)