Toshiba e-STUDIO350 Service Handbook page 559

15) Poor image transfer
Defective area Step
Paper 1
2
3
4
Transfer charger 5
6
Registration roller 7
High-voltage trans- 8
former (Transfer
charger)
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Check items
Is the paper in the drawer or LCF/
PFP curled?
Is the paper in the drawer or LCF
damp?
Is the paper type corresponding to
its mode?
Using the recommended paper?
Is the transfer charger case dirty?
Is the transfer charger wire dirty?
Is there any abnormality related to
the registration roller or with the
roller itself?
Is the high-voltage transformer out-
put defective?
5 - 123
Prescription
Reinsert the paper with the reverse side up
or change the paper.
Avoid storing paper in damp place.
Select the proper mode.
Use the recommended paper.
Clean it.
Clean it.
Clean the roller if it is dirty. Securely attach
the springs if they are detached. Replace
the clutch if it is defective. Adjust the rota-
tion speed of the roller.
Adjust the output, or replace the trans-
former.
e-STUDIO350/352/353/450/452/453
TROUBLESHOOTING
5