Toshiba e-STUDIO350 Service Handbook page 341

(3) Loosen the stepped screw 1 turn and 2
screws on the adjustment plate a half turn
(status of temporary fixing).
(4) Remove the stepped screw at the rear of
right-hand hinge.
(5) Open the RADF, and then loosen 2 hand
screws 1 turn (status of tentative fixing).
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Half turn
1 turn
Fig. 3-57
Fig. 3-58
Fig. 3-59
3 - 53
Screw
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3