Firmware Updating - Toshiba e-STUDIO350 Service Handbook

6.

FIRMWARE UPDATING

In this equipment, following firmware is written on the ROM on each board.
Firmware
Master data (HDD program data, UI data)
System ROM (System firmware, OS data,
UI data)
Engine ROM (Machine firmware)
Scanner ROM (Scanner firmware)
NIC ROM (NIC firmware)
(e-STUDIO350/ 450 only)
RADF ROM (RADF firmware)
Finisher ROM (Finisher firmware)
Finisher ROM (Saddle stitcher firmware)
FAX ROM (FAX firmware)
When you want to update the firmware above or the equipment becomes inoperative status due to
some defectives of the firmware, updating the firmware is available by the following actions.
<e-STUDIO350/450>
• Updating with the download jig
P. 6-3 "6.1 Firmware Updating with Download Jig (e-STUDIO350/450)"
• Updating with PC connected
P. 6-66 "6.3 Firmware Updating with FSMS (Field Service Manager) (e-STUDIO350/450)"
• Updating with the USB Storage Device
P. 6-79 "6.4 Firmware Updating with USB Storage Device (e-STUDIO350/450)"
<e-STUDIO352/353/452/453>
• Updating with the download jig
P. 6-34 "6.2 Firmware Updating with Download Jig (e-STUDIO352/353/452/453)"
• Updating with the USB Storage Device
P. 6-91 "6.5 Firmware Updating with USB Storage Device (e-STUDIO352/353/452/453)"
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Stored
Hard disk
System control PC board (SYS board)
<e-STUDIO352/353/452/453>
The system firmware is stored into the
hard disk from the FROM basic section
software version "V1.00/4.22".
Logic PC board (LGC board)
Scanning section control PC board (SLG
board)
NIC board
RADF control PC board (MR-3015/ MR-
3018)
Finisher control PC board
(MJ-1023/ MJ-1024/ MJ-1101)
Finisher control PC board (MJ-1024)
FAX board (GD-1150/ GD-1200)
6 - 1
07/11
Update method
USB Storage Device
USB Storage Device
* When replacing
the system control
PC board (SYS
board), update
with the Download
jig.
USB Storage Device
* Updating with the
Download jig is
also possible.
USB Storage Device
* Updating with the
Download jig is
also possible.
Download jig
Download jig
Download jig
Download jig
Download jig
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6