Toshiba e-STUDIO350 Service Handbook page 593

[C] Display during the update
The processing status is displayed as follows on the LCD screen during the update. (As an example,
the display for updating the system ROM is explained below.)
Turn ON the power while [8] button and [9] button are pressed simultaneously.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Press [START] button after selecting the item
to be updated. The device check starts.
When the device check completes, erasing the
data in the ROM of the equipment starts.
6 - 17
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6