Toshiba e-STUDIO350 Service Handbook page 491

[ED16] Buffer tray home position error
MJ-1101
Is there any mechanical problem when the buffer tray guide is opened/closed?
YES Fix the mechanism.
NO
Is there a disconnection of the connector, incorrect installation or breakage of the buffer tray
home position sensor (S5)?
l YES •
l
•
•
NO
Is the harness between the buffer tray home position sensor (S5) and the finisher control PC
board (CN18) disconnected or open circuited?
l YES •
•
NO
Is the harness between the buffer tray guide motor (M3) and the finisher control PC board
(CN18) disconnected or open circuited?
l YES •
•
NO
Replace the finisher control PC board.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Connect the connector securely.
Reinstall the sensor correctly.
Replace the sensor.
Reconnect the connector securely.
Replace the harness.
Reconnect the connector securely.
Replace the harness.
5 - 55
06/01
e-STUDIO350/352/353/450/452/453
TROUBLESHOOTING
5