<Updating FAX ROM>
Important:
•
Before updating the FAX ROM, make sure to print out the current Function list for mainte-
nance, Function list (ADMIN), Phone book number information and Group number informa-
tion. In case the updating is failed and the registered information of the users is lost for some
reason, re-register the user information referring to the lists and recover it.
•
Confirm the following items before turning OFF the power of the equipment. Turning OFF the
power may clear the data below.
-
Confirm that the "MEMORY RX" LED is OFF and there are no memory reception data.
-
Print the "Mailbox/Relay box report" and then confirm that there are no F code data.
-
Press the [JOB STATUS] button to display the screen and then confirm that there are no
memory transmission data.
(1)
Install the ROM to the download jig.
Make sure the direction is correct (P. 6-35 "Fig. 6-29").
(2)
Turn OFF the power of the equipment.
(3)
Take off the connector cover.
(4)
Remove the cover plate.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Connector cover
Fig. 6-61
Cover plate
Fig. 6-62
6 - 63
05/11
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6