Toshiba e-STUDIO350 Service Handbook page 48

[FAX] button: OFF ([FAX] LED: OFF)
Digital
Button
key
A
B LCF connection
C Bypass unit connection
D Bypass paper sensor
[1]
E ADU connection
F ADU opening/closing switch
G ADU exit sensor
H ADU entrance sensor
A PFP upper drawer detection switch
B
C PFP upper drawer paper stock sensor
D PFP upper drawer feed sensor
[2]
E PFP connection
F PFP side cover opening/closing switch
G PFP upper drawer empty sensor
H PFP upper drawer tray-up sensor
A LCF tray bottom sensor
B LCF standby side paper mis-stacking sensor
C
D
[3]
E LCF drawer detection switch
F
G
H LCF feed side paper stock sensor
A PFP lower drawer detection sensor
B
C PFP lower drawer paper stock sensor
D PFP lower drawer feed sensor
[4]
E PFP motor rotation status (Motor is rotating at output mode
(03))
F
G PFP lower drawer empty sensor
H PFP lower drawer tray-up sensor
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Items to check
-
-
-
-
-
-
-
-
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 28
05/12
Contents
Highlighted Normal dis-
display play
e.g. e.g.
- -
Not connected Connected
Not connected Connected
No paper Paper present
Not connected Connected
ADU opened ADU closed
Paper present No paper
Paper present No paper
Drawer not Drawer
installed present
- -
Paper almost Paper present
empty
Paper present No paper
Not connected Connected
Cover opened Cover closed
No paper Paper present
Tray at upper Other than
limit position upper limit
position
Tray at bottom Other than
position bottom posi-
tion
Correct stack- Incorrect
ing stacking
- -
- -
Drawer not Drawer
installed present
- -
- -
Paper almost Paper present
empty
Drawer not Drawer
installed present
- -
Paper almost Paper present
empty
Paper present No paper
Abnormal rota- Normal rota-
tion tion
- -
No paper Paper present
Tray at upper Other than
limit position upper limit
position