Chapter 2 Preparations
1.7
Internal Flash Memory
This section describes the procedure for installing the Internal Flash Memory.
Internal flash memory connector
1.7.1
Installation
Install the Internal Flash Memory in the following procedure.
1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Lift the air duct and remove it.
3. Attach the Internal Flash Memory and fix it
with the screw provided with this product.
1.7.2
Removal
To remove the Internal Flash Memory, reverse the installation procedure.
54
Express5800/R120d-1E User's Guide
1. Installing Internal Optional Devices