NEC Univerge SV8100 Features And Specifications Manual page 1621

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
22-02-01
Incoming Call Trunk Setup –
Incoming Type
22-04-01
Incoming Extension Ring Group
Assignment
22-07-01
DIL Assignment
22-08-01
DIL/IRG No Answer Destination
24-02-02
System Options for Transfer –
MOH or Ringback on Transferred
Calls
24-02-03
System Options for Transfer –
Delayed Call Forwarding Time
Voice Mail Integration (Analog)
Description/Comments
Assign the incoming trunk type for
each trunk. There is one item for
each Mode. When using
Trunk-to-Trunk Forwarding the
trunk must be set to 0.
Assign extensions (up to 32) to
Ring Groups. Calls ring
extensions according to Ring
Group programming.
Assign the destination extension
for each DIL incoming trunk
(001~200).
For this selection to work, set
Program 22-02-01 to
4 = DIL.
For Voice Mail Overflow, enter the
Ring Group that unanswered DILs
to Voice Mail ring after the DIL Call
Waiting time (Program 22-01-04).
Enable (0)/Disable (1) MOH on
Transfer. If enabled, a transferred
caller hears Music on Hold while
their call rings the destination
extension. If disabled, a
transferred caller hears ringback
while their call rings the
destination extension. For this
option to work with voice mail, the
transferred call must be an
unscreened transfer.
Set the time a transferred call
waits at an extension forwarded to
Voice Mail before routing to the
called extension mailbox.
Assigned Data
1
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No other
extensions ring for
incoming Ring Group 1
calls.
Extension Number
(maximum eight digits)
(default not assigned)
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
0 = Hold Tone
1 = Ring Back
Tone
(default = 0)
0~64800 (seconds)
(default = 10)
Issue 5.0
Level
2
3
2 - 1595

Advertisement

Table of Contents
loading

Table of Contents