NEC Univerge SV8100 Features And Specifications Manual page 1679

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Operation
To have the system page you when you have a call:
1.
Press Speaker (or lift the handset at the single line telephone) and dial 713.
2.
When you hear, "Please start recording," record your Personal Greeting.
If you already have Park and Page or Personal Greeting set up, you can dial:
3 to erase (the optionally HOLD to cancel the erase)
5 to listen (then # again to listen again)
7 to record again
3.
Dial
7.
#
4.
When you hear, "Please start recording," record your page and dial
complete.
A paging chime overrides the first four seconds of an announcement. Allow a delay in announcement recording
for chime time.
5.
Dial the Page Zone that should broadcast your announcement.
For example, for Internal Zone 1 dial 701 + 1, or for Combined Paging Zone, 1 dial
6.
Dial the Park and Page type:
2 = All Calls
3 = Outside Calls Only
7.
Press Speaker to hang up (or go on-hook at the single line telephone).
To pick up your Park and Page:
1.
Press Speaker (or lift the handset at the single line telephone).
2.
Dial
+ your extension number.

To cancel your Park and Page:
1.
Press Speaker (or lift the handset at the single line telephone).
2.
Dial 713 + 3.
3.
Press Speaker to hang up (or go on-hook at the single line telephone).
Voice Response System (VRS) – Call Forwarding – Park and Page
when the announcement is
#
1 + 1.
Issue 5.0
2 - 1653

Advertisement

Table of Contents
loading

Table of Contents