NEC Univerge SV8100 Features And Specifications Manual page 1747

UNIVERGE SV8100
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
Use this key...
Code: 41 + sec. ext.
Operation: Press
key
Code: 42 + boss
ext.
Operation: Press
key
Code: 43
Operation: TRK call
+ Hold + ext + Press
key
Code: 44
Operation: Place or
answer call + Press
key
Code: 45
Operation: Place or
answer call + Press
key
Code: 46
Operation: Press
key
Code: 47 + dest.
ext.
Operation: Press
and hold key
Code: 48
Operation: Hear
Off-Hook Signaling
tones + Press key
Code: 49 + ext or
voice mail number
Operation: Press
key
Code: 50
Operation: Press
key
Features and Specifications Manual
Table 3-5 Function Key Codes by Number (Continued)
press the key and enter the code (e.g., 48 for Voice Over).
For this feature...
Secretary Call
Serial Call
Hold
Department Calling
Reverse Voice Over
Voice Over
Call Redirect
Account Codes
When you ...
Call your secretary (using
the buzzer).
As a secretary pick up a
call ringing your boss's
extension.
Place a Serial Call to a
co-worker.
Put a call on System Hold
(if hold key is reassigned).
Put a call on Exclusive
Hold.
Log in or log out of your
Department Calling
Group.
Initiate Reverse Voice
Over.
Initiate or respond to
Voice Over.
Redirect an incoming call
to an extension or voice
mail.
Enter Account Codes.
Also see
Key Lamp Status
Srvc Code
On red at source
Fast Flash red at
destination
On red when
activated
None
None
None
On when
removed, Off
when installed
Full BLF red
On red when
responding Hold
Flash red when
listening
On red when
activated
Flashes when in
DND/Call Forward
None
Issue 5.0
-
-
-
-
-
650
-
690
-

or
##
3 - 39