Command Line Reference
General Commands
6-6
reset
This command restarts the system or restores the factory default settings.
Syntax
reset <board | configuration>
•
board - Reboots the system.
configuration - Resets the configuration settings to the factory
•
defaults, and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On Self-Test.
Example
This example shows how to reset the system:
HP420#reset board
Reboot system now? <y/n>: y
show history
This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Exec
Command Usage
•
The history buffer size is fixed at 10 commands.
•
Use the up or down arrow keys to scroll through the commands in
the history buffer.