Command Line Reference
System Management Commands
9-26
Default Setting
Enabled
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# web-management ssl
ProCurve Access Point 530(config)#
show buttons
This command displays the status of the push button capabilities.
Syntax
show buttons
Default Setting
N/A
Command Mode
Manager Exec
General Configuration Context
Example
This example displays the status of the push buttons on the access point.
ProCurve Access Point 530# show buttons
Custom Reset
Factory Reset
Password Reset
System Reset
ProCurve Access Point 530#
Enabled
Enabled
Enabled
Enabled