NEC Univerge SV8100 Features And Specifications Manual page 79

UNIVERGE SV8100
Physical Ports and Software Ports
Each PGD(2)-U10 ADP has a physical port for connection to the telephone system and two logical ports.
For programming, the ports are also called software ports. The physical port connects to a station position
on a ESI ETU. During installation, the first PGD(2)-U10 ADP you set up is physical port 1; the second
PGD(2)-U10 ADP is physical port 2, etc. Each PGD(2)-U10 ADP has two software ports, which are
numbered independently of the physical ports. Normally, the first PGD(2)-U10 ADP set up has software
ports 1~2; the second PGD(2)-U10 ADP has software ports 3~4, etc. There are a total of 96 software
ports (48 PGD(2)-U10 ADPs x 2 ports each). During programming, you assign ACI extension numbers
and Department Group options to PGD(2)-U10 ADP software ports, not physical ports. During installation,
you connect equipment to the jacks on the PGD(2)-U10 ADP that correspond to the software port. Refer
to the UNIVERGE SV8100 System Hardware Manual for installation details.
Conditions
ACD agents who are logged on can be recorded.

When ACI software ports are set to be a Background Music source, it only plays to a

speaker, not a multiline telephone.
An extension cannot have Hotline keys for ACI software ports. Music on Hold ACI software

ports can be Music on Hold music sources.
An extension can have One-Touch Keys for ACI software ports. The gives the extension

user:
One-Touch access to external music

One-Touch External Paging

One-Touch loud ringer control

ACI software ports can provide External Paging with control, independent of the External

Paging circuits on the CD-CP00-US. The PGD(2)-U10 ADP can be connected to any DLC
port.
The devices connected to the PGD(2)-U10 ADP must be compatible with the specifications
below. Refer to the UNIVERGE SV8100 System Hardware Manual for installation details.
Analog Communications Interface (ACI)
PGD(2)-U10 ADP
Relay Contacts
Maximum Contact Ratings
Minimum Application Load
Audio/Music Input
Input Impedance
/ACI Interface Specifications
30 V DC @ 60 mA
90 V AC @ 10 mA
1 V DC @ 1 mA
47 K Ohms @ 1 K Hz
Issue 12.0
2 - 49