NEC Univerge SV8100 Features And Specifications Manual page 64

Issue 12.0
Up to 100 System Alarm Reports can be stored. When the buffer fills, the oldest record is

deleted to allow the new record to be saved.
If the System is set up to email the Alarm Reports and the Mail Server is down, the report is

not sent.
System Information Reports cannot be set for output via email.

Scheduled Alarm Reports via email prints all alarms. When the system detects New

alarms, this information is output via email individually.
Email Alarm Reports can be sent when each New alarm occurs (Per Event). If you want to

receive complete Alarm Reports periodically, you must specify 12 individual dates and
times in Program 90-24-01~Program 90-24-04 (per period).
 A maximum of 99 entries are emailed with the scheduled alarms.
The DIMLast and DIMDump files are attached to the email only when using the 47-18-xx

programs for SMTP email and if a PZ-ME50-US and USB memory stick are mounted on the
CCPU.
The DIMLast and DIMDump files are not sent via email when Program 90-03-01 is used to

manually generate a data dump. They are only saved on the USB attached to the CCPU.
The PZ-ME50 must be mounted to the CCPU for the 47-18-xx program settings to work.

Once successfully sent, the DIMLast and DIMDump files are deleted from the system.

If the email retry limit is exceeded, the DIMLast and DIMDump files are deleted from the

system.
A USB Drive must be mounted to the CCPU for the DIMLast and DIMDump files to be sent

via email.
If Program 90-11-15 is set to 1 (Enable) and no USB drive is mounted to the CCPU, the

system will not restart if an error occurs which causes the SV8100 to reboot.
The Alarm Improvement, where the DIMLast and DIMDump files are sent via email, require

the V7000 Enhancement License (0036) and Maintenance License (0043).
The Alarm Improvement, where the DIMLast and DIMDump files are sent via email, require

the occurrence of a major system event. DIMLast and DIMDump files are not sent for
normal alarm events.
Default Settings
None
2 - 34
UNIVERGE SV8100
Alarm Reports