NEC Univerge SV8100 Features And Specifications Manual page 44

Issue 12.0
Related Features
Automatic Route Selection
PBX Compatibility
Speed Dial – System/Group/Station
Station Message Detail Recording
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-11 Basic Trunk Data Setup –
Account Code Required
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
2 - 14
Description/Comments
Enable/Disable Account Codes for
each trunk.
Assign a function key as an
Account Code key (code 50). Use
this key instead of the dial pad to
enter the  before and after the
Account Code.
Assign a Class of Service (1~15)
to an extension.
Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
Level
2 3


