NEC Univerge SV8100 Features And Specifications Manual page 82

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 12.0
Program
Program Name
Number
14-09-01
Conversation Recording
Destination for Trunks – ACI
Recording Destination
Extension Number
14-09-02
Conversation Recording
Destination for Trunks – ACI
Automatic Recording for
Incoming Calls
15-07-01
Programmable Function Keys
15-12-01
Conversation Recording
Destination for Extensions – ACI
Recording Destination
Extension Number
15-12-02
Conversation Recording
Destination for Extensions – ACI
Automatic Recording for
Incoming Calls
33-01-01
ACI Port Type Setup – ACI Type
2 - 52
Description/Comments
Assign the ACI Call Recording
destination per trunk. The
destination can be an ACI port
extension number (assigned in
Program 11-06-01) or an ACI
Department Group pilot number
(assigned in Program 11-08-01). If
destinations are assigned in
Program 14-09 and Program
15-12, the destination in Program
15-12 is followed.
Determine whether or not a trunk
should be automatically recorded
when an incoming call is received.
If required, program an ACI
Conversation Record Key (code
69 + 0). This key allows an
extension user to press the key to
manually record a call to the ACI.
Assign the ACI Call Recording
destination per extension. The
destination can be an ACI port
extension number (assigned in
Program 11-06) or an ACI
Department Group pilot number
(assigned in Program 11-08). If
destinations are assigned in
Program 14-09 and Program
15-12, the destination in Program
15-12 is followed.
Determine whether or not an
extension should be automatically
recorded when an incoming call is
received.
Set each ACI software port for
input (1) or input/output (2). Use
input ports for Music on Hold
sources. Use output ports for
External Paging/ringer control.
UNIVERGE SV8100
Assigned Data
Extension Number =
Maximum eight digits
(default not assigned)
0 = Off
1 = On
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99
(Appearance Function
Code) (Service Code
752 by default)
Extension Number =
Maximum eight digits
(default not assigned)
0 = Off
1 = On
(default = 0)
ACI Ports: 1~96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
Analog Communications Interface (ACI)
Level
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents