Table of Contents
Advertisement
Section 3: Operation
NOTE: The Channel list and Input dialog box cannot be hidden during use of the menus.
Display Slidebars
Enter a check mark to superimpose a small slidebar over the current image whenever an adjustable parameter
is selected directly with a key such as
still be accessed, but will be hidden during adjustment. This option does not affect slidebars in menus.
Display Error Messages
Choose how you want to be notified of errors detected in either the incoming signal or projector. Select
"Screen" or "All" (default) to see brief on-screen messages. This is particularly recommended during setup or
testing of the projector. Or, select "Serial Ports" to receive messages via RS-232 or RS-422 serial communica-
tion only. To hide error message displays, such as during shows and presentations, select "OFF" or "Serial
Ports".
Splash Screen Setup
Use the Splash Screen to choose when you would like to display a special introductory splash screen image,
such as your company logo, graphic or message.
Always Off
Always On
Startup Only
Startup and No Signal
To replace the default "Christie logo" splash screen (or other) with one of your own, use the KoRE Librarian
to download the desired .bmp to the projector. This overwrites the current splash screen content in projector
memory.
3.6.2 System Configuration (Communication)
Settings in the Communications submenu define and
control how single or multiple projectors are can link with
each other and with a controlling device. See
Baud Rates
The baud rate setting determines the speed of
communication to and from the projector on the RS-232
or RS-422 links. The maximum rate for either standard is
115200. Set the baud rate to match that of your
controlling device, such as your PC. If you are unsure
about what baud rate to choose, refer to the documenta-
tion for the controlling device. In an existing network of
projectors, if you discover that a projector has a different
baud rate, make sure to use the drop-down list and select the correct baud rate using the
scroll this control with the
3-46
or
. If "Display slidebars" is unchecked, these slidebars can
Bright
Contrast
A
SPLASH SCREEN NEVER APPEARS
A
SPLASH SCREEN IS ALWAYS ON BEHIND THE CURRENT DISPLAY IMAGE
.
LAR TO WALLPAPER
T
HE SPLASH SCREEN LOGO APPEARS AT PROJECTOR STARTUP ONLY
A
SPLASH SCREEN APPEARS AT STARTUP ONLY IF THERE IS NO SOURCE SIGNAL
Figure
3-28.
keys. Serial communication is always 8 data-bits, no parity.
.
Communications
Baud Rate for RS232
1.
2.
Baud Rate for RS422
Projector
3.
Network Routing
4.
5.
Ethernet Settings
6.
Broadcast Key
Backlight
7.
Front IR
8.
9.
Back IR
Wired Keypad
0.
Figure 3-28 Communications
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
,
-
SIMI
.
.
115200
19200
004
All Joined
On
On
Off
key. Do not just
020-100002-06 Rev. 1 (04-2011)
Advertisement
Table of Contents
