Christie Mirage S+/HD/WU User Manual page 145

2. INSTALL THE LENS CAP AND PRESS THE LENS RELEASE BUTTON.
See Figure
3. ROTATE THE LENS.
Rotate the lens counter-clockwise until the tabs are free
from the lens retainer ring. See A in
NOTE: The connector slide assembly allows the connector
to move as the lens is rotated.
4. PULL LENS OUT.
Lens connectors will disconnect when you pull the lens
straight out from the projector. See B in
5. INSERT NEW LENS.
NOTE: Remove small rear cap! Keep front cap on.
Electrical connector: Line up male connector on the lens with the female connector on the connector
slide assembly.
Insert lens: Align the tabs on the lens plate lock with the slots in the lens retainer ring. Push the lens in
until the tabs touch the back of the retainer ring.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
4-12.
Figure 4-12 Depressing Lens Release
Figure 4-13.
Figure 4-13.
Section 4: Maintenance
Figure 4-13 Rotating the Lens
4-11