Table of Contents
Advertisement
Section 3: Operation
3. If desired, review and/or edit the selected channel's setup options in the Channel Edit menu:
Channel Option
An alpha-numeric label assigned to the current channel
Name
which can be defined and/or changed as desired. Chan-
nel names can be upto 12 characters in length.
A 2-
Number
E
Input
NTER A NUMERIC VALUE
WHERE ON THE PROJECTOR
IS CONNECTED
I
In Menu
F CHECKED
DEFINED CHANNELS WITH UNCHANGED PARAMETERS
THIS DEFINED CHANNEL THEN APPEARS IN THE LIST
AVAILABLE WHEN THE CHAN KEY IS PRESSED
UNCHECKED
Channel Setup
VIA THE
I
Auto Source
F CHECKED
MATICALLY LOCATE THIS CHANNEL WHEN AN INCOMING
INPUT SIGNAL MATCHES
TOR CAN LOCATE THE SELECTED CHANNEL ONLY WHEN
IT IS DIRECTLY SELECTED VIA THE
KEYPAD
If checked, all of the image settings for this channel are
Locked
disabled (locked). If unchecked (default), all available
image settings can be adjusted as desired.
Select this option to see or change its C
Previous
tings for the previous channel in the Channel Setup list.
Channel
Select this option to see or change its C
Next Channel
tings for the next channel in the Channel Setup list.
3.5
Adjusting the Image
The most commonly used options for image adjustments are accessed through the following two Main menus:
• Size and Position (
• Image Settings (
From either of these two menus, you can change settings affecting the image from the current channel by
working with the appropriate slidebars, check boxes, and drop-down lists.
Pressing
returns you to the previous menu (or to the presentation, if from the Main menu), and accept
Exit
any changes you may have entered. Settings are saved for the current channel.
3-24
Description
.
DIGIT CHANNEL NUMBER
(1
TO
'
I
S
NPUT PANEL THE SOURCE
.
(
,
DEFAULT
EXCEPT FOR AUTOMATICALLY
,
THE CHANNEL MUST BE ACCESSED VIA THE
(
M
MENU
ENU
A
S
UTO
OURCE FUNCTION
, (
),
DEFAULT
THE PROJECTOR CAN AUTO
. I
F NOT CHECKED
.
+ 1)
Menu
+ 2)
Menu
8)
CORRESPONDING TO
),
. I
F
)
+ 3
ON THE KEYPAD OR
.
-
,
-
THE PROJEC
C
HAN KEY ON THE
E
set-
HANNEL
DIT
E
set-
HANNEL
DIT
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
Notes
I
F YOU ENTER A CHANNEL NUMBER THAT
,
ALREADY EXISTS
A DIALOG MESSAGE
APPEARS INDICATING THAT THIS NUMBER IS
. A
ALREADY IN USE
SSIGN A DIFFERENT CHAN
.
NEL NUMBER
Y
99
OU CAN DEFINE UP TO
I
F YOU ENTER A CHANNEL NUMBER THAT
NOTES: 1)
,
ALREADY EXISTS
A DIALOG MESSAGE APPEARS INDI
CATING THAT THIS NUMBER IS ALREADY IN USE
A DIFFERENT CHANNEL NUMBER
50
.
CHANNELS
O
-
(OSD)
NOTE:
N
SCREEN DISPLAY
LIST IS AN OPTION THAT MUST BE SET IN THE
P
.
REFERENCES MENU
A
CHANGE IN INPUT SIGNAL WILL NOT RESULT
.
IN A CHANNEL CHANGE
You cannot use Auto Setup with a locked
channel.
020-100002-06 Rev. 1 (04-2011)
-
.
CHANNELS
-
-
ASSIGN
.
Y
OU CAN DEFINE
2)
OF THE CHANNEL
M
ENU
Advertisement
Table of Contents
