Installation Type - Christie Mirage S+/HD/WU User Manual

Section 2: Installation and Setup
• If centerlines are parallel, but others are not, turn the
front stacking mount wheel to bring the centerlines
into alignment.
6. Align the edges of the grid with centerlines aligned:
a. Adjust zoom (top projector) to align the edges of its
image with the other image.
b. Adjust focus. When aligned, all lines from the
combined red/green grids will be yellow.
7. Secure all stacking wheels and leg nuts
• Turn all 3 stacking wheels until they are firmly secure against
the rest of the stacking mount. See
• Secure both 2 rear leg nuts against the bottom of the projector.
8. Repeat Steps 1 to 7 if stacking a third projector.

2.2.5 Installation Type

Choose the installation type that suits your needs: front or rear screen, floor mount, or inverted mount.
• Easy to set up
• Can be moved or changed quickly
• Easy to access
Front Screen, Inverted Mount (ceiling) Installation
• Does not take up audience space
• Projector is unobtrusive
• Projector cannot be accidentally moved
Rear Screen, Floor Mount Installation
• Projector is completely hidden
• Projector is easily accessed
• Usually good ambient light rejection
2-12
Critical Safety Procedure
Figure
ADVANTAGES
ADVANTAGES
ADVANTAGES
:
.
2-19.
CONSIDERATIONS
• Shares floor space with audience
CONSIDERATIONS
• Installation is more permanent
• It is more difficult to access the projector
CONSIDERATIONS
• Requires separate room
• Installation cost is usually higher
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
Figure 2-18 Adjust Front Wheel
Figure 2-19 Secure All Hardware
020-100002-06 Rev. 1 (04-2011)