Table of Contents
Advertisement
Section 3: Operation
Brightness Uniformity Submenu
Brightness Uniformity provides further refinement of displays already matched for their primary colors and
overall light output. Use Brightness Uniformity option to create an exceptionally smooth image in which no
area appears brighter and/or more red, green or blue than another. In the Brightness Uniformity submenu,
select the "Uniformity Enable" check box to access a multitude of adjustments for critical color light output
control in specific areas throughout the image. Your settings apply as long as the "Uniformity Enable" check
box is enabled and you are using a "User" color temperature defined by the Brightness Uniformity controls. To
disable the Brightness Uniformity function, delete the "Uniformity Enable" check mark.
NOTES: 1) Refer to
achieving uniform brightness in adjacent displays. 2) If the Christie TWIST
enable check box changes to a list giving the option to choose from several different uniformity maps.
Please refer to documentation included with your Christie TWIST
Edge Blending Submenu
The Edge Blending submenu provides a range of controls for smoothing together the overlapping bright edges
of multiple adjacent projected images to create a single larger "seamless" image. These controls, which
primarily affect whitelevels, are typically used in conjunction with mechanical lens blinders (optional), which
are installed on the front of the projector and which primarily affect blacklevels.
NOTES: 1) There is a centerline (both horizontal and vertical) in the Edge Blending test pattern. The
intersection of these lines is the true center of the projector's display area. 2) Refer to
Using Multiple
Color Adjustments by X/Y and Color Saturation Submenus
NOTES: 1) For defining or changing a User 1, 2, 3, or 4 color palette or "gamut". Sometimes known as
Comprehensive Color Adjustment™. 2) Factory-defined primary color levels, which ensure a
specific color performance from projector-to-projector, can be altered in the Service menu only. If you
suspect alteration of these defaults, the factory settings can be recovered with selection of "Reset to
Factory Defaults?" in the Color Primary Settings submenu accessed via the Service menu (password-
protected).
From the factory, the projector can utilize any of the 3 pre-defined color performance settings identified at right
(default=Max Drives), or colors can be driven on the basis of color temperature
applications, 1 of these options will produce accurate and realistic colors from a variety of sources. They can
be applied at any time in the Advanced Image Settings menu ("Select Color Adjustment"), and are not
adjustable.
3-52
Figure 3-30 Keystone Adjustment
Section 3.10 Using Multiple Projectors
Projectors.
for the complete step-by-step procedure for
TM
module.
TM
(Figure
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
module is installed, the
Section 3.10
3-31). For most
020-100002-06 Rev. 1 (04-2011)
Advertisement
Table of Contents
