Table of Contents
Advertisement
Most controls in the PIP Size and Position menu adjust the
PIP (secondary) image in the same fashion as their
counterparts in the main Size and Position menu adjust the
main image. Refer to
descriptions. Exceptions are as follows:
Position Presets
Set the location of the PIP (secondary) image in the display.
Aspect Ratio Presets
Choose the desired aspect ratio for your PIP window. A "Default" aspect ratio matches that of the projector,
whereas "Anamorphic" will be a widescreen window. Choose according to your incoming source material.
Advanced Size and Position
Refer back to
Advanced Size and Position Submenu
PIP Image Settings Submenu
Adjust the PIP (secondary image) without affecting the size or position. The primary image remains
unchanged. Refer to
PIP Border Width
Set the desired line thickness for your PIP window border.
PIP Border Color
Select the desired color for the PIP window border.
NOTES: 1) Numbers 7 and 8 on the Picture-in-Picture and Switching submenu control switching parameters.
2) Disable PIP in order to work with Seamless Switching. 3) Disable PIP and Best Switching for
Interlaced sources > 35kHz.
3.7.2 Working with Seamless Switching
Seamless Switching is the ability to instantly and/or smoothly switch sources, and is controlled with options 7
and 8 in the PIP and Switching menu. To use Seamless Switching, PIP must be disabled.
Tips for best source switching:
• Ensure to configure a channel for each source.
• Progressive digital and analog sources are recommended
• Set Image Optimization to Seamless Switching (see below).
• For best results, use the same frame rate and gamma setting for each.
NOTE: Avoid using 2 interlaced sources.
Image Optimization
Use this setting to choose what is more important, image quality or switching between sources. Selecting Best
Image Quality will ensure your image is always proper however when switching sources, the screen will go
blank increasing your switching time. Smooth Switching allows for a cleaner transition between sources. The
image will fade from 1 image to another according to the Fade Time control. Seamless Switching overrides the
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
Section 3.5.3 Image Settings Menu
Section 3.5.3 Image Settings Menu
for
for details.
for details.
Section 3: Operation
3-61
Advertisement
Table of Contents
