Table of Contents
Advertisement
From your presentation, you can access any of the individual options in these menus by pressing
followed by the appropriate 2-digit number representing their location in the Menu system. For example, press
+ 2 + 3 to quickly access the "Gamma" option in the Image Settings menu.
Menu
Note that for certain options, you may prefer to use a "direct key" from presentation level to go directly to a
particular option without traveling through the menu system (available for certain display parameters only).
For example, press
presentation.
NOTES: 1) To hide these "direct" slidebars, disable the" Display Slidebars" check box in the Menu
Preferences menu. 2) To hide the entire Menu system from view, turn OFF the on-screen display by pressing
the OSD key.
3.5.1 Before You Begin
Using Auto Setup
For a most efficient first step in perfecting the image, press
the projector quickly optimizes critical display parameters such as size, position, pixel tracking, etc., based on
the type of incoming source data detected. An Auto Setup can save considerable setup time, and you can still
modify the display parameter settings as desired using the menu options described below.
3.5.2 Size and Position Menu
In the Size and Position menu you can increase or decrease the size of your image, change its proportion
(aspect ratio), move the image to a specific area of the screen, and refine other related parameters. Use Size and
Position controls to match the image precisely to the screen used at the site.
Refer to
Section 3.3.5 Using Slidebars and Other Commands
controls. Changes made in the Size and Position menu are applied immediately, and are saved when you exit
the menu (press
Resize Presets Option
NOTE: The same resize presets are available to all HD widescreen models. Please note however, the graphics
used to describe each preset in this section are of the SXGA+ models only.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
to access the "Contrast" slidebar immediately. Press
Cont
Figure 3-17 Size and Position Menu
or
).
Menu
Exit
to return to your
Exit
. This initiates an automated process in which
Aut o
Setup
if you need help using any of the options and
Section 3: Operation
,
Menu
3-25
Advertisement
Table of Contents
