Replacing The Projection Lens - Christie Mirage S+/HD/WU User Manual

Section 4: Maintenance
4. RE-INSTALL THE FILTER GRILLE/DOOR.
Secure with the single top screw.
4.8

Replacing the Projection Lens

A variety of lenses can accommodate different throw distances and specific types of installations. Refer to
Section 6 Specifications
1. TURN OFF THE PROJECTOR, COOL AND UNPLUG.
NOTE: If necessary, a lens can be swapped out while the projector is running, but this can result in dust
being drawn into the projector. Avoid if possible.
Before removing or installing any lens, turn off the projector and allow the fans to cool the lamp before
unplugging the projector. Ensure that the lens cap is ON.
4-10
Figure 4-10 Installing the Angled Air Filter (3.0kW models only)
for more details. To change a lens, follow the steps below.
Unplug the projector.
Figure 4-11 Lens Parts
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1 (04-2011)