Working With Pip - Christie Mirage S+/HD/WU User Manual

Section 3: Operation
Other PIP or Seamless Switching tips to keep in mind include:
• When using 2 digital signals or 1 analog and 1digital, each must be 165 mega pixels
• When using two analog signals, each must be 90 mega pixels
• Avoid using an interlaced source in the PIP window
• Seamless switching may affect image quality in some cases

3.7.1 Working with PIP

NOTE: Controls for the primary image are all accessed through the Main menu. To control the secondary
(PIP) image, access picture controls through the PIP and Switching submenu.
Figure 3-36 PIP Menu (Switching is not applicable for the Projector)
Use the first of 6 (1-6) options in the PIP and Switching menu to enable and define how you want to use PIP.
Swap Main and PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image becomes secondary (PIP),
and the secondary image becomes primary. Swapping is available only when PIP is enabled (option 1).
NOTE: There may be a slight delay when swapping the Primary and Secondary images.
PIP Enable
Short Cut: Press
Toggle to display from two sources at once (Picture-
in-Picture) or the primary source only. This check
box turns the secondary source ON and OFF.
NOTE: Disable PIP for Interlaced sources >
35kHz.
PIP Size and Position Submenu
3-60
PIP and Switching
1.
Swap Main and PIP Image
2.
Picture
3.
PIP Size & Position
-in-
Picture
4.
PIP Image Settings
Options
5.
PIP Border Width
6.
PIP Border Color
7. Image Optimization
8.
9.
Numbers Select Main Image
from your presentation.
PIP
PIP Enable
4
Red
Fade Time
PIP Only
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
Switching
Options
(n/a)
020-100002-06 Rev. 1 (04-2011)