Main Features; Lamps/Light Output; Inputs - Christie Mirage S+/HD/WU User Manual

1.4.2 Main Features

General
• DLP™ 3-chip electronics with true 1400 x 1050 (SXGA+) or 1920 x 1200 (WUXGA), and 1920 x 1080
(HD) native resolution
• Ten-bit digital video processing
• Single-lens design with field-interchangeable, fast-change lens – no tools needed
• Modular design for easy servicing
• Intelligent Lens System (ILS
• Built-in handles and multiple rigging points
• Motorized lens

1.4.3 Lamps/Light Output

Brightness (ANSI lumens)
• Roadster S+12K/HD12K or Mirage S+12K/HD12/WU12 = 12000
• Roadster S+16K or Mirage S+14K/S+16K = 16000
• Roadster HD18K = 18000
• Matrix WU12= 12000
• Mirage HD18 = 18000
• Mirage WU18= 18000
• Roadster S+20K or Mirage S+20K = 20000
Contrast Ratio (ANSI lumens)
• 450:1 ANSI
• 1600-2000:1 Full Field
• LiteLOC™ for automatic constant-brightness control
• Quick change bubble-style lamp module

1.4.4 Inputs

There are 2 different types of Input faceplate configurations (model dependant). Refer to
Figure 1-3. These configurations may include the following inputs:
• One analog RGBHV/YPbPr input with 5 BNCs
• One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
• One analog composite-video input
• One analog S-video input
• Built-in multi-standard video decoder (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60 AND SECAM)
• One Dual SD/HD-SDI module (standard on Roadster models only)
• Compatible with all currently used HDTV formats
For simplicity, this manual refers to the configuration in
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
™
) to save and restore lens settings
Figure 1-2 only.
Section 1: Introduction
Figure 1-2 and
1-5