Table of Contents
Advertisement
Section 3: Operation
Slidebars in Menus
The current value for a given parameter, such as size or vertical stretch, appears to the left of its slidebar icon
(Adjustment window). This number often expresses a percentage, or it may have units associated with it (such
as pixels, degrees Kelvin, etc.), depending on the specific option.
Press the
change accordingly. Hold for continuous adjustment.
Or press
to activate a slidebar text box for a specific number entry via the keypad, and then press
save (or press
"Direct" Slidebars
For quick access, you can access Gamma, Brightness, and Contrast slidebars without traveling through the
Menu system. For example, simply press
accessed with the Contrast option in the Image Settings menu.
Use the Arrow keys to adjust a direct slidebar, or press
keypad or standard IR remote, then press
are done, press
NOTES: 1) You can still adjust a direct slidebar as usual if the display is turned OFF (refer
Screen Display)
disappears if it is not used within 5 seconds.
Check Boxes
Conditions are present if its adjacent check box contains a check mark. To select or clear a check box, simply
highlight and press
box is numbered, simply enter its number to immediately toggle ("Select" or "Clear") the check box.
Drop-down Lists
To view a drop-down list of options available for a given parameter (labeled with a inverted triangle shaped
icon), you can either:
• highlight the parameter, and press
• enter the Menu option number.
Press the
desired. See
Figure
3-16
keys to gradually adjust the setting
to cancel).
Ex it
to save and return to your presentation.
Ex it
or
theMenu
Preferences) except the slidebar is not visible. 2) A direct slidebar
, or highlight and press the
keys to navigate within the list. Press
3-8.
. Both the number and the length of the bar
to immediately display the same CONTRAST slidebar
C ont
and type a specific number from the built-in
or the
keys to save (or
key to "Select" or
to select a highlighted option from the list, if
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
to cancel). When you
Ex it
toOSD (On-
key to "Clear". If a check
020-100002-06 Rev. 1 (04-2011)
to
Advertisement
Table of Contents
