Working With The Lamp; Lamp Menu - Christie Mirage S+/HD/WU User Manual

Section 3: Operation
Frame Lock Enable settings and forces the output to run at 60Hz regardless of the input signal. Image is 100%
seamless when switching sources.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35kHz.
Fade Time
Set how long (in seconds) it takes to gradually dissolve 1 image into another for a source switch. Fading is
available for single-image "best" source switching only. PIP cannot be in use, and Image Optimization must be
set to Best Switching.
NOTE: PIP must be disabled for Fade Time to take effect. Also, the PIP window must be closed to activate it.
Numbers Select Main Image
Use the Numbers Select Main Image option to use the numeric
keys #1-8 as Input keys. This remapping of the "lite" remote
(refer to Figure 3-35) can be particularly useful with PIP
displays, providing a convenient shortcut for changing the
primary (background) image without first having to return to the
Main menu. To use the keys in this manner all of the time, even
with single displays, select Always. For normal remote function,
select Never (default). Set to When PIP Active to activate
number keys as number keys only when PIP is in use.
NOTE: The functionality of the Numbers Select Main Image
option only works when menus are closed.
3.8

Working with the Lamp

3.8.1 Lamp Menu

Whenever you install a new lamp in the projector, access the Lamp
menu to record the lamp serial number in the projector's memory.
You can also choose a lamp mode for regulating power and light
output, change optical aperture size (if present), and access other
read-only information pertaining to past and present lamps.
Lamp Hours (read-only) shows the number of hours logged on
the current lamp. Whenever you record a new lamp serial number
this value automatically resets to "0", where it begins to log time
for the new lamp. This information also appears in the Status
menu.
Lamp S/N (read only) option is the serial number recorded for the
current lamp. When you install a new lamp and enter its serial
number, the number appears here.
3-62 Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1 (04-2011)