Table of Contents
Advertisement
Section 3: Operation
Alternatively, press the
(turns it to black). Close the shutter to mute all display while maintaining access to projector functions.
Opening the shutter restores the image.
NOTES: 1) The status of the shutter is shown in the LCD display window at the rear of the projector. 2) The
shutter is open upon power-up.
Function Key
If You are Within a Menu
Using the
Func
Section 3. For example, press
If You are Within a Presentation
Press the
key followed by a 2-digit number to enable a specific color or
Func
colors in the display (see right).
For example,
Func
will display all color data. Eliminating one or more colors can help with certain
diagnostics and setups, such as when accurately overlaying one image on top of
another when stacking projectors.
Defining Other Uses
Through ASCII messaging on a PC, you can also create special user functions for keys 1 - 5 and 7 - 9, and
others.
For example, the
menus. Refer to the separate Christie Serial Communications publication.
Projector
Press
to access a specific projector within a group of projectors or to confirm if the local projector is
P ro j
listening. The number in the "Enter Number" window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in the Menu Preferences menu.
The "Projector" check box (read-only) shows whether or not the projector physically connected to a keypad are
listening to commands from that keypad. A check mark means that connected projector is listening; if there is
no check mark, you are communicating with a different projector.
To control a specific projector with the keypad, enter the 3-digit number assigned to the projector you want to
use. If you switch to a projector other than the one you are currently using, the check mark will disappear.
To broadcast to multiple linked projectors, press
NOTE: 1) Keypad commands will affect all projectors in the chain. 2) The "Broadcast Keys" option in the
Communications menu must be selected for only one (any) projector in a serial network. The keypad
in use must be OFF (disabled) for the remaining projectors. Refer to
Protocols and
Enter
Press
to select a highlighted menu/ option item, to toggle a check box, or to accept a parameter
adjustment, and return to the previous menu or image.
3-12
key to toggle from the present ON/OFF state. A closed shutter blanks the display
S hutter
key for special tasks within the Menu system is noted with the appropriate topic elsewhere in
in the Channel Setup menu to enable deletion or copying of a channel.
Func
will display only red and green data,
6
4
key can be programmed to trigger RTEs (Real Time Events) or to display custom
Func
Conversion, and
twice without entering a projector number.
P ro j
Section 3.6 Adjusting System Parameters and Advanced
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
6
7
Func
Section 2.11 Keypad and Remote
020-100002-06 Rev. 1 (04-2011)
Controls.
Advertisement
Table of Contents
