Christie Mirage S+/HD/WU User Manual page 78

Section 3: Operation
Select a Resize Presets option to quickly display an image in its native resolution or to automatically resize an
image to closely fill the projector's native resolution of 1400 x 1050, or to optimize the width or height of your
display. Size, Position and Blanking parameters will automatically adjust accordingly. Or, if Blanking is set
first, which defines an Active Input Area. Resize Preset scaling will occur in this region of interest only.
Resizing options are explained in detail below.
What is the Resizing Default?
By default when displaying a new source, your image will utilize as much of the projector's display area (1400
x 1050) as possible for the type of incoming source data. Refer to
When "Custom" Appears
The Custom re-size descriptor automatically appears in the Size and Position menu when any of the values
for Size, Vertical Stretch, H-Position, V-Position or Blanking do not correspond to those for a preset. This
option is not a choice in the Resize Presets drop-down list.
Select Default
Select Default for most sources (factory default). The image is centered and displays as large as possible
(without affecting aspect ratio), depending on the type of input source, as described below:
• "A 5:4 graphic image will enlarge to fill the screen height, and be centered between narrow black sidebars.
• "A video image or 4:3 graphic image will enlarge to fill the screen width.
• "An HDTV (16:9) image will fill the width and be centered between black bars on top and bottom.
NOTE: Images and resolutions are shown for example only.
No Resizing
Select No Resizing to display the image in its native resolution, which is probably smaller than the projector's
1400 x 1050 resolution. For example, for a source with a native resolution of 800 x 600, the "No Resizing"
centers a small image within a black border. The black border areas are unused areas. See below.
3-26
Figure 3-18 Resize Presets
Select Default below.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1 (04-2011)