System Configuration - Christie DLV1400-DX User Manual

Section 3: Operation

System Configuration

— GEOMETRY & COLOR —
3-42
Downloaded From projector-manual.com Christie Manuals
the remaining active sensor to
remote keypad.
NOTE: Protocols B – G are used for rental staging applications.
Wired Keypad
The wired keypad is ON by default to when connected to the rear of the projector. The
projector will then respond to incoming commands from this port. To disable the
wired keypad, you must use a different keypad—the built-in or an IR remote
keypad—to select "off". This safeguard prevents you from accidentally disabling the
wired keypad during use.
In the Configuration menu, select the
Geometry and Color submenu when
you need to modify overall color
performance and/or image geometry
for all sources.
Test Pattern
Choose the desired internal test
pattern, or select OFF to turn off a test
pattern. Alternatively, use the
key for cycling through test patterns.
Keystone
NOTE: If the optional ChristieTWIST module is installed, this option is Keystone
and Warping, and activates a submenu for defining custom image shapes. Please
refer to documentation included with your Christie TWIST module.
Use to correct a keystoned image shape in which both sides of your image are inclined
toward the top or bottom edge. Tilting the projector in relation to the screen typically
causes keystone; the lens surface and screen are no longer parallel to each other.
. The projector will no longer respond to an IR
OFF
Test
Figure 3.1. Keystone Adjustment
013-100199-03