Image Settings Menu - Christie Mirage S+/HD/WU User Manual

Section 3: Operation
1.
2.
3.
4.
5.
Plug & Display (EDID) Option
Select the Plug & Play option from the Advanced Size and Position
menu. By default, a Plug & Play (EDID) source outputs a signal
according to the EDID information provided by the projector. To override
this information and display in a different format (for example, if your
Plug & Play [EDID] device does not support the projector's resolution
and/or frequency), select the desired Plug & Play (EDID) resolution
from the list.
Any daisy-chained projectors also displays according to the chosen Plug
& Play (EDID) format.
= Extended Display Identification Data standard.
EDID

3.5.3 Image Settings Menu

Use options in the Image Settings menu to alter your
image without affecting its size or position. Changes
made to the Image Settings menu are applied
immediately and are saved when you exit the menu
(press or
Exit
projector model or source are disabled and appear
dim (gray).
Contrast
Short Cut: Press
slidebar.
"Contrast" increases or decreases the perceived difference between light and dark areas of your image (0-100).
For best results, keep close to 50. If the contrast is set too high, the light parts of the image lose detail and
clarity. If the contrast set too low, the light areas will not be as bright as they could be, and the overall image
will be dim. For best results, start with a low value and increase so that whites remain bright , but are not
distorted or tinted, and that light areas do not become white (i.e., are "crushed").
3-30
PIP Advanced Size & Position
Active In put Window 1600x1200
Top Blank 0
Bottom Blank 0
Left Blank 0
Right Blank 0
Plug & Disp lay <EDID> Native Resolut ion 60Hz
Figure 3-21 Blanking of a PIP Image
). Options not available for the
Menu
and adjust the Contrast
Contr ast
PIP Advanced Size & Position
Active Input W in dow 1600x1200
1. Top Blank 49
2. Bot tom Blank 2
3. Lef t Blank 485
4. Righ t Blank 67
5. P lug & Display <EDID> Native Resolution 60Hz
Native Resolution 60 Hz
1 4 0 0 x 1 0 5 0 6 0 H z
720p (1280x720 60Hz)
DC2K (2048x720 60Hz)
1024x768x116Hz 3D
1280x1024x110Hz 3D
1400x1050x102Hz 3D
1080p 60Hz / 1080i 60Hz
1080p 50Hz / 1080i 50Hz
1080p 24Hz / 1080i 30Hz
Figure 3-22 Image Settings Menu
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1 (04-2011)