Christie Mirage S+/HD/WU User Manual page 21

6. Select a Source.
Using either keypad, press
image for the source you connected to in Step 2. The display will resize as needed, producing an image as
large as possible for the type of source present.
NOTE: Refer to
secondary menus.
7. Optimize the Display
Press AUTO SETUP on the built-in keypad or AUTO on the standard IR remote to initiate an automated
process in which the projector optimizes critical display parameters such as size, position, pixel tracking, etc.,
for the current source. AUTO SETUP can save time in perfecting a display. You can modify the adjustments
later as desired. Refer to
8. Lens Adjustments
Zoom
With the input image displayed:
• If standard IR remote: Press ZOOM +
• If built-in keypad: Press ZOOM +
Hold the ZOOM key down to see the effect – arrows in the display indicate the direction of
the zoom. See
Focus
With the input image displayed:
• If remote keypad: Press FOCUS +
• If built-in keypad: Press FOCUS +
Hold the FOCUS key down to see the effect. Arrows in the display indicate the direction of the focus. See
Figure 2-3
Lens Offset
To move the image:
• If standard IR remote: Press either Lens H +
+
See Figure
• If built-in keypad: Press
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
Input 1
,
Appendix E: Menu Tree
Section 3 Operation.
Figure 2-2.
.
or
2-4.
Lens
Shift
+ the Arrow keys. See
Input 2 Input 4
Input 3
, , ,
to quickly navigate to a specific menu, and associated options/
or
or
or
or
or
Figure 2-5
Section 2: Installation and Setup
Input 5 Input 6
, or to select and display the
or Lens V
Figure 2-4 Arrow Key-
Zoom
Figure 2-2
Focus
Figure 2-3
pad
Lens
Shift
Figure 2-5
2-3